Quad 3×3 Wideband (CBRS, C-Band & LTE-LAA) Hybrid Combiner Array

256-600-6000

Quad 3×3 Wideband (CBRS, C-Band & LTE-LAA) Hybrid Combiner Array

-161dBc PIM, 600-6000 MHz, IP67

256-600-6000 is an array of four 3×3 Wideband Hybrid Coupler that can used to combine signals in 600MHz – 6000MHz range, including CBRS, C-Band and LTE-LAA. The combined signal will appear at all the output ports. These are perfect for a 4×4 MIMO System. Each section of the hybrid is independent of each other. These are symmetric devices so inputs and outputs can be used interchangeably. The unused port must be always terminated with a 50Ω Load. These hybrid couplers can be used over a wide range of temperature and environmental conditions.

FEATURES

Array of four 3×3 Hybrid Combiners
Splits / Combines signals in the 600MHz – 6000MHz
Covers all Cellular Bands, CBRS, C-Band and LTE-LAA
Perfect for 4×4 MIMO Implementations
Best-in-class Isolation
Each Hybrid Combiner is independent of each other
Very low Insertion Loss
Available 3-10 or Nex10 Connectors
Low-PIM & High Power Handling
Ease of Mounting with mounting holes
Weatherproof for Outdoor use
In Stock and Available Immediately

Electrical Specification

Frequency Range	600MHz – 6000MHz
Coupling Loss	5.10±1.00dB @ 600-2700 MHz 5.20±1.00dB @ 2700-4000 MHz 5.20±1.20dB @ 4000-6000 MHz
Isolation	24.00 dB @ 600-3800 MHz 23.00 dB @ 3800-6000 MHz
VSWR	1.25
Impedance	50 Ohms
Input Power	200 Watts (Avg)
Intermodulation (PIM – 3rd)	-161dBc (2 Tones +43dBm)

Mechanical Specification

Connectors	4.3-10 (D43) / Nex10 (X10)
Housing Finish	Aluminum Body
Mounting Method	Mounting Holes
Temperature Range	-30°C to 70°C
Weight	18.00 lbs
Humidity	5% - 95%
Environment	IP67